Ajax 12V PSU for Hub/Hub Plus/ReX

Ajax 12V PSU for Hub/Hub Plus/ReX

The Ajax 12V PSU is a power supply unit which connects hubs and ReX range extenders to low-voltage power sources. The device will allow you to power and operate an ajax system wherever you’ll find a 12V power supply such as a caravans, external buildings & vehicles.
  • Input voltage: 8-20 V DC
  • Output voltage: 4.65 V ± 3%
  • Compatible with Hub/Hub Plus/ReX
Next day delivery?
The Ajax 12V PSU replaces the 110/230V power supply unit in the Hub, this allows for Ajax systems to be powered through a 12V power outlet, commonly found in caravans, external buildings, vehicles or anywhere else where you’d find a 12V power outlet. 

This then gives the ability to keep yourself and your belongings protected when in a caravan, in an external building or a car. Installation is easy, just follow these simple steps:
  1. Remove SmartBracket from the back of the device 
  2. Make sure the device is switched off using the power button (hold this down for 2 seconds)
  3. Disconnect power and ethernet cables
  4. Remove four screws of the back lid and take off. 
  5. Remove the screws which attached the boards to the device body
  6. Remove both boards, keeping them together & not disconnecting them
  7. Disconnect the power supply unit from the main board 
  8. Connect 12V PSU for Hub/Hub Plus/ReX to the mainboard using the eight-pin connector. 
  9. Reassemble the boards and tighten the screws 
  10. Connect power
  11. Switch on the 12V Power source 
  12. Switch the device back on by holding the button down for 2 seconds
  13. Close and fix the SmartBracket to mounting panel 

Want to know more?